Operation method of electric stacker

1. Driving

Before driving the vehicle, check the working conditions of the brake and pump stations and ensure that the battery is fully charged. Hold the joystick with both hands and force the vehicle to drive slowly towards the work cargo. If you want to stop, you can use the hand brake or foot brake to stop the vehicle

2. Unloading

(1) When the fork is low, keep it vertical to the shelf and carefully approach the shelf and insert it into the bottom of the pallet.

(2) Retract the stacker to move the forks out of the pallet.

(3) Raise the fork to the required height and slowly move to the pallet to be unloaded, while ensuring that the fork is easy to enter the pallet and the goods are in the safe position of the fork.

(4) Raise the fork until the pallet is lifted from the shelf

(5) Slowly retreat in the channel

(6) Slowly lower the goods while ensuring that the forks do not touch obstacles during the lowering process

Note: During the lifting of the cargo, the steering and braking operations must be slow and careful.

3. Stacking

(1) Keep the goods low and approach the shelves carefully.

(2) lift the goods to the top of the shelf plane

(3) Move forward slowly, stop when the goods are above the shelf, put down the pallet at this point and pay attention to the fork not to apply force to the shelf under the goods to ensure that the goods are in a safe position.

(4) Slowly retreat and ensure that the pallet is in a firm position

(5) Lower the fork to the position where the stacker can travel

4. Safety facilities

(1) Main switch: main switch of power supply

(2) Foot brake: reliable parking brake

(3) Restrictor valve: control descending speed

(4) Pressure limiting valve: control load

(5) Protective net: to protect the driver

5. Prohibited matters

(1) It is forbidden to operate semi-electric stackers after drinking

(2) Prohibition of overloading, uneven and flat stacking of goods

(3) Straddle operation is prohibited

(4) It is forbidden to park on ramps or steps